Nuno Montenegro

STM . School of Technology and Management . Beja


Nuno Montenegro . photos: © FG+SG Architectural Photography . + architizer

The School of Technology and Management of the Polytechnic Institute of Beja is a building of about 11600-sqm of construction area, set in a rectangular frame of 90x80 m2.



























The building was conceptually divided into five blocks from A to E. The block A is the most impressive - a continuous pre-stressed concrete structure of 80,90m length. Its main characteristic is a unique portal frame with 50,80m span floating above school’s
main entrance. This portal frame consists of two columns, which are the circulation shafts, and a horizontal member containing two auditoriums for theory classes and an exhibition room at the center. That horizontal member of the portal frame consists of two longitudinal pre-stressed concrete box type beams overpassing the big span. These two beams, with different heights because of the configuration of the auditoriums, are the support of the roof and bottom slab of the auditoriums, at top and bottom flange level.
The higher beam, located at the bottom end of the auditoriums has 7,82 m height and lodges the corridor for the room’s access, and the other beam, at the upper end of the auditoriums, has a medium height of 3,50m.

Design director and team coordinator: Nuno Montenegro.
Collaborator architects: Carla Cameira, Susana Ataíde, Rute Ribeiro, Pedro Carvalho and Mariana Medeiros.


0 comentarios :

Publicar un comentario